Water mist dust collector makes calcium hydroxide production easier
During the digestion process, lime will produce a large amount of hot water vapor, which will carry a certain amount of calcium hydroxide powder. After the pulse dust collector removes dust once, it enters the preheated water mist dust collector to collect the powder mist twice or three times, and then becomes clean hot water vapor, which is discharged into the atmosphere through pipes.
The calcium hydroxide water collected by the preheated water mist dust collector in the water storage tank has a water temperature of 60-80 degrees Celsius. Some sediment is circulated by a general sewage pump into the first-level pre-digestion to promote the chemical reaction of quicklime, so as to shorten the digestion time, improve the quality of calcium hydroxide and discharge no sewage.
Fineness: –
Production capacity: >15～18t/h
Scenario: In the process of converting calcium oxide (CaO) into calcium hydroxide (Ca(OH)₂) by adding natural water (H₂O), a large amount of hot steam is generated, and a certain amount of calcium hydroxide dust is entrained in the gas. If it is naturally discharged into the air, it will inevitably cause white pollution, which will seriously affect the surrounding environment of the factory (factory production area). Using the GK-PSC series water mist dust collector will completely solve the source of white pollution and beautify the surrounding environment of the factory.
Functional characteristics
During the digestion process, lime will produce a large amount of hot water vapor and carry a certain amount of calcium hydroxide powder. After the pulse dust collector is used for dust removal, it enters the preheated water mist dust collector for two or three times to collect the powder mist and become clean hot water vapor, which is discharged into the atmosphere through the pipeline. The calcium hydroxide water collected by the preheated water mist dust collector in the water storage tank has a water temperature of 60-80 degrees Celsius. Some sediment is circulated by the general sewage pump into the first-level pre-digestion to promote the chemical reaction of quicklime, so as to shorten the digestion time, improve the quality of calcium hydroxide and discharge no sewage.
High cost performance
When calcium oxide (quicklime) is added with water and stirred in the digester box, a large amount of hot steam is continuously generated. Spray nozzles and spray nozzles of different sizes are installed in the discharge pipeline. Under the action of the fan and dust removal water pump, a water curtain area of a certain width is formed. The hot steam carrying calcium hydroxide dust is filtered in the water curtain area and becomes clean and environmentally friendly water vapor, which is discharged into the atmosphere through the pipeline.
Parameter comparison table
| Parameter | Specification |
|---|---|
| Max. Feed Size | ≤10mm |
| Processing Capacity | >15～18t/h (varies by model & region) |
| Dust Removal Method | Pulse + Preheated Water Mist |
The above data is for reference only. Please refer to the actual product or product manual for specific information.
